-
Audio
- Conjuntos de audio
- Radio de automóvil
- CD, DVD y televisores.
- Carkits / Manos libres
-
Incorporado
- AUX / Adaptadores
- Accesorios
- Módulos de sonido activos
- Accesorios de antena
- Adaptadores de antena
- Las antenas
- Cables de extensión de antena
- Paneles de montaje de audio
- Condensadores
- FISCUBE Accesorios
- FM transmitter
- Antenas GPS
- Adaptador multimedia IMA
- Kits de cables
- Cables
- caja de altavoz
- Audio de motor
- Adaptador de radio OEM
- Accesorios Pioneer
- Desmontaje de radio
- Cables de gradiente de radio
- Transmisores
- Fusibles
- Portafusibles
- Accesorios para iPod
-
Altavoces
- Altavoces de 10 cm
- Altavoces de 12 cm
- Altavoces de 13 cm
- Altavoces de 16 cm
- Altavoces de 17 cm
- Altavoces de 20 cm
- Altavoces de 25 cm
- Altavoces de 30 cm
- Altavoces de 4 x 10 cm
- Altavoces de 4 x 6 cm
- Altavoces de 5 x 7 cm
- Altavoces de 6 x 8 cm
- Altavoces de 6 x 9 cm
- 6 cm speakers
- Altavoces de 7 cm
- Altavoces de 8 cm
- Altavoces específicos para coche
- conjuntos
- Auriculares
- Kits de altavoces personalizados
- Tweeters
- Altavoz resistente al agua
- Subwoofers
- Amplificador
-
Miscelánea
- Detras del coche
- Apple Watch Bandjes
- Material de fijación
- Reparación del carrocería
- Los animales
- Misceláneos
- Alimentos y bebidas
-
Herramientas
- Bitsets
- Llave para bujias
- Compresor
- Llaves de zócalo
- Llaves de filtro
- Conjuntos de herramientas
- Martillos
- Llaves Inbus / torx
- Gatos
- Pinceles
- Tornos
- Lámparas de correr
- Cuchillos
- Metros
- Llaves inglesas
- Soporte del motor
- Ruedas de nariz
- Aceitera
- Neumáticamente
- Remaches pop
- Llave de trinquete
- Cintas métricas
- Tijeras
- Kits de reparación de rosca
- Destornilladores
- Abrazaderas de manguera
- troqueles de corte de hilo redondo
- Artículos de soldadura
- Buscadores de voltaje
- Cepillos de acero
- llaves combinadas
- Aspiradoras
- Alicates
- Cintas
- Clips de prueba
- Probadores
- Tie wraps
- Embudos / jarras
- Abrazaderas de resorte
- Pistola de engrase
- Nivel de aire
- Luz de trabajo
- Herramientas de taller
- Productos de taller
- Llave de rueda
- Sierras
- Linternas
- Fundas
- Ropa
- OUTLET SHOP
- Tienda
- Productos de rally
- Recreación y vacaciones
- Red Bull
- Seguridad
- Pintura y lacas
-
Liquidos
- 5in1
- Aditivos
- Latas de gasolina
- Agua destilada
- Limpiadores de manos
- Limpiadores de inyección
- Jarras / Cubetas
- Productos de sistema de refrigeración
- Refrigerante
- Liqui Moly
- Limpiador de motor
- Aditivos para aceites
- Los aceites
- Limpiador
- Limpiadores / desengrasantes
- Aceite de freno / hidr / transmisión
- Líquido para lavaparabrisas
- Lubricantes
- Sprays
- De arranque
- Embudos
- Grasas
- Liquidos
- Bombas de liquido
- Productos de taller
- Unsorted
- Electrónica
- Exterior
-
Interior
-
Conductor & Cabina
- Apoyabrazos
- Espejo interior
- Sillas de oficina
- Carbon Interieurdelen
- Cockpit
- Salpicadero
- Accesorios para cinturones de seguridad
- Almohadilla para cinturón de seguridad
- Cinturon de seguridad
- Freno de estacionamiento
- Interieur Lijsten
- Pedales
- Pomos para palanca de coche
- Volante deportivo
- Sillas
- Marcos de sillas
- Fundas de asiento
- Adaptadores de volante
- Cubiertas del volante
- Botones del volante
- Bujes del volante
- Dashboard faceplates
- Comodidad y seguridad
- Los titulares
- Sillas de coche para niños
- Almacenamiento
- Productos de rally
- Estilo y lujo
- Cortinillas
-
Conductor & Cabina
-
Chasis
- Suspensión neumática y electrónica
- Frenos
- Amortiguadores
-
Suspensiones roscada
- Suspensiones roscada AP
- Suspensiones roscada Bilstein
- Schroefsets Cobra
- Suspensiones roscada Eibach
- Suspensiones roscada H&R
- Suspensiones roscada HD
- Suspensiones roscada JOM
- Suspensiones roscada KONI
- Suspensiones roscada KW
- Schroefsets Ohlins
- Suspensiones roscada SPAX
- Suspensiones roscada ST
- Suspensiones roscada Supersport
- Suspensiones roscada TEIN
- Suspensiones roscada VanSlam
- Suspensiones roscada Vogtland
- Espaciador de la rueda y adaptadores
- Suspensión deportiva
- Estabilización y apisonamiento
- Muelles deportivos
- Reemplazo y otras partes
- Rendimiento
- Pulimentos
-
Iluminación
- Misceláneos
- Faros y luces traseras
- LED y neón
-
Lamparas
- 880 Lamparas
- 881 Lamparas
- 893 Lamparas
- 9005xs Lámparas
- 9006xs Lámparas
- BA15D Base de bombilla
- BA15S Base de bombilla
- BA9S Base de bombilla
- BAT9S Base de bombilla
- BAU15S Base de bombilla
- BAX10S Base de bombilla
- BAX9S Base de bombilla
- BAY15D Base de bombilla
- BAZ15D Base de bombilla
- Luces de tubo
- DUPLO Lamparas
- Set de bombillas caravana
- H1 Lamparas
- H10 Lamparas
- H11 Lamparas
- H11B Lamparas
- H13 Lamparas
- H15 Lamparas
- H16 Lamparas
- H2 Lamparas
- H3 Lamparas
- H3C Lamparas
- H4 Lamparas
- H7 Lamparas
- H8 Lamparas
- H9 Lamparas
- HB1 Lamparas
- HB3 Lamparas
- HB4 Lamparas
- HB5 Lamparas
- HS1 Lamparas
- HiR2/9012 Lamparas
- Osram
- Otros
- P13W lampen
- P21W Base de bombilla
- P27/7W
- P45T Base de bombilla
- PR21/5W
- PR21W
- PS19W
- PSX24W Lamparas
- PSY Lamparas
- PY21W Base de bombilla
- PY24
- R2 Lamparas
- R702K Lamparas
- S25 Base de bombilla
- SV8 Base de bombilla
- Lámparas de scooter
- T10 Base de bombilla
- T15 W16W
- T16 Base de bombilla
- T20 Base de bombilla
- T25 Base de bombilla
- T2W Base de bombilla
- T4W Base de bombilla
- T5 Base de bombilla
- W21/5W Base de bombilla
- W21W lampen
- Verlichting Units
- Xenon
-
Llantas
- Neumáticos y accesorios
- Espaciador de la rueda y adaptadores
- Accesorios
-
Juegos de llantas
- Llantas de 13 pulgadas
- Llantas de 14 pulgadas
- Llantas de 15 pulgadas
- Llantas de 16 pulgadas
- Llantas de 17 pulgadas
- Llantas de 18 pulgadas
- Llantas de 19 pulgadas
- Llantas de 20 pulgadas
- Llantas de 21 pulgadas
- Llantas de 22 pulgadas
- Llantas de 23 pulgadas
- Llantas de 24 pulgadas
- Llantas de 26 pulgadas
- Conjuntos de invierno
- Llantas de invierno
- Tornillos y tuercas de rueda
- Invierno y temporada
Filtro
Manufacturer Navigation
Manufacturer A-Z
-
(22)
Absaar
-
(1)
AccuAir
-
(3)
AceWell
-
(1)
Active Autowerke
-
(25)
AEZ
-
(6)
aFe Power
-
(73)
AirSuspension Links
-
(246)
Akrapovic
-
(2)
Alti Giri
-
(2)
ANAF
-
(1)
Anygrip
-
(822)
AP
-
(316)
AP Schroefsets
-
(311)
AP Suspension
-
(20)
Arbre Magique
-
(2)
Argo
-
(67)
Armaspeed
-
(12)
Armor All
-
(803)
Armytrix
-
(278)
artFORM
-
(1)
ASD Tuning
-
(237)
Athena
-
(89)
Autoglym
-
(4)
AutoSky
-
(7164)
AutoStyle
-
(29)
Avant-Garde
-
(2187)
Avisa
-
(187)
Bagyard-Airride
-
(2)
Bar's
-
(11)
Bari
-
(4)
Bastuck
-
(1)
Batavia
-
(277)
BBS
-
(15)
BE by Breyton
-
(24)
BE Wheels
-
(7)
Belgom
-
(2)
Belmic
-
(361)
BEYERN
-
(47)
Bigboi
-
(1087)
Bilstein
-
(6)
Bilstein B10
-
(5332)
Bilstein B12
-
(2157)
Bilstein B14
-
(2865)
Bilstein B16
-
(5)
Bilstein B16CS
-
(14)
Bilstein B16DT
-
(4)
Bilstein B16DT2
-
(35)
Bilstein B2
-
(1278)
Bilstein B3
-
(18898)
Bilstein B4
-
(13571)
Bilstein B6
-
(9634)
Bilstein B8
-
(26)
Bilstein B8DT
-
(36)
Bilstein EVO
-
(9)
Bilstein EVO R
-
(14)
Bilstein EVO S
-
(7)
Bilstein EVO SE
-
(5)
Bilstein EVO T1
-
(3)
Bilstein EVO T2
-
(512)
Bilstein Overig
-
(3)
Black & Decker
-
(72)
Blanco
-
(21)
Blaupunkt
-
(2)
Bleko
-
(15)
BMW Original Parts
-
(483)
Bonrath
-
(683)
BORBET
-
(70)
Bosch
-
(2453)
Brembo
-
(226)
Breyton
-
(100)
Bridgestone
-
(1710)
Brock
-
(12)
Brunox
-
(168)
Cades
-
(372)
Calibre Wheels
-
(24)
California Scents
-
(185)
Car Bags
-
(1420)
Car Shades
-
(9)
Caractere
-
(1)
CarCept
-
(16)
CarFantasy
-
(4)
Carkids
-
(1223)
Carmani
-
(59)
Carnamics
-
(1686)
Carpoint
-
(112)
Castrol
-
(10)
Celly
-
(10)
CFC
-
(185)
CFC Car Film Components
-
(271)
Charge Speed
-
(55)
Chemical Guys
-
(338)
CIKCAR
-
(1)
Clarion
-
(5188)
ClimAir
-
(168)
Cobra
-
(10)
Commandant
-
(949)
Continental
-
(2)
Control Fire
-
(21702)
COR WHEELS
-
(42)
CRAY
-
(60)
Crunch
-
(1)
Cruz
-
(1)
CSF
-
(2879)
CSR
-
(11)
Cult-Society
-
(981)
M-tech
-
(56)
Mabor
-
(5)
MAC
-
(1)
Maggi
-
(12731)
Magnaflow
-
(240)
MANDRUS
-
(1)
Marternator
-
(33)
Martin Cox
-
(3)
Matador
-
(350)
MAX6
-
(1)
Maxlife
-
(1)
maxton
-
(6866)
Maxton Design
-
(132)
Maxton Design Carbon Division
-
(400)
mbDESIGN
-
(158)
McGard
-
(2)
MEC design
-
(1)
Mechanix Wear
-
(169)
Meguiar's
-
(13)
Menabo
-
(1)
Mentos
-
(17)
MER
-
(7)
MHW Styling
-
(284)
Michelin
-
(1)
MILLE MIGLIA
-
(1630)
Milltek
-
(1)
Mlltek
-
(2)
Mobil
-
(84)
MOMO
-
(229)
Motec
-
(74)
Motip
-
(48)
Motor X
-
(168)
Motordrome
-
(19)
MST Performance
-
(36)
Mtech
-
(1)
P3
-
(1)
P3x
-
(1)
PAM
-
(461)
Pantherbra
-
(1)
PantherBra Carbon
-
(9)
Parksafe
-
(1)
Parrot
-
(14)
Pavo
-
(2)
Peruzzo
-
(105)
Philips
-
(4)
PIAA
-
(11)
Pilot
-
(7)
Pilot Xenon
-
(14)
Pingi
-
(72)
Pioneer
-
(5184)
Pipercross
-
(64)
Pirelli
-
(4)
Plastico
-
(3526)
PowerFlex
-
(3)
PowerRepair
-
(72)
Pressol
-
(1)
Pro-User
-
(4)
Procar
-
(227)
Protecton
-
(34)
Racimex
-
(1)
Racingline
-
(113)
Racoon
-
(156)
RADI8
-
(2572)
Ragazzon
-
(10)
RAID HP
-
(1)
Rain Buster
-
(2)
Rain Vision
-
(17)
Rain-X
-
(624)
RC Design
-
(936)
RC-Design
-
(182)
RDX
-
(1021)
RDX Racedesign
-
(12)
Recaro
-
(29)
Red Bull Racing
-
(938)
REMUS
-
(15)
Repaparts
-
(1)
ResQMe
-
(1)
Restore
-
(32)
Revotec
-
(3066)
RGM
-
(2)
Rial
-
(1727)
Rieger Tuning
-
(41)
RimRingz
-
(199)
Rockford Fosgate
-
(592)
RotiForm
-
(6)
Rustyco
-
(11)
Rustyco roestverdelger
-
(28)
Sabelt
-
(31)
Samco
-
(799)
Samco Sport
-
(7)
Saunders
-
(16)
SCC
-
(7231)
SCC Spoorverbreders
-
(9009)
Schmidt
-
(241)
Schrick
-
(8)
Schroth Racing
-
(356)
Scorpion Exhaust
-
(192)
Semperit
-
(6)
Shampoos
-
(40)
ShineMate
-
(16)
Sicurit
-
(203)
Sicustar
-
(1)
Sicutruck
-
(15)
Sicutune
-
(499)
SiliconHoses
-
(805)
Simoni Racing
-
(4)
Simoniz
-
(527)
Simons
-
(1)
Slick50
-
(9)
Slime
-
(1)
SmartVan
-
(212)
SONAX
-
(386)
Sonniboy
-
(615)
Sparco
-
(286)
SPAX
-
(10)
SPY
-
(201)
SRS-Tec
-
(11)
SSDN Audio
-
(8)
SSDN Mobile
-
(2782)
ST Suspension
-
(16)
STANCE WHEELS
-
(2)
Stanley
-
(4)
Stoplock
-
(2)
STP
-
(11)
Streetwize
-
(87)
STRO Performance
-
(1)
STRO-Performance
-
(27)
STUTTGART
-
(177)
SunClip
-
(1646)
Supersport
-
(9102)
Supersprint
-
(71)
SYRON
LSD vleugeldeuren Alfa Romeo 147 01/01- Type: 937 incl. GTA Bouwjaar: 01/01- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Alfa Romeo GT 03/04- Type: 937 Bouwjaar: 03/04- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi 80 05/91-08/00 Type: 89 Coupe, Convertible Bouwjaar: 05/91-08/00 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi A3 03/03- Type: 8P 3-door Bouwjaar: 03/03- Opmerkingen: a/ b/ d/ f/ j/ p Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi A3 09/96-05/03 Type: 8L 3-door Bouwjaar: 09/96-05/03 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi A4 02/95- Type: B5 5-door Bouwjaar: 02/95- Opmerkingen: a/ b/ d/ f/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi A5 Type: 8H Cabrio Bouwjaar: Opmerkingen: a/ b/ d/ f/ j/ o/ p Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi A5 / S5 07- Type: B8 Coupé Bouwjaar: 07- Opmerkingen: a/ b/ d/ i Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi S 3 03/99-05/03 Type: 8L 3-door Bouwjaar: 03/99-05/03 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi TT 09/06- Type: 8J Coupé Bouwjaar: 09/06- Opmerkingen: a/ b/ d/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Audi TT 10/98- Type: 8N incl. Roadster Bouwjaar: 10/98- Opmerkingen: a/ b/ d/ f/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW 3er (E36) 04/94- Type: 3C, 3/C, 3/CG Compact Bouwjaar: 04/94- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW 3er (E36) 09/90- Type: 3C, 3/C, 3/CG Coupe, M3 Bouwjaar: 09/90- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW 3er (E90) 04/05- Type: 390L Sedan Bouwjaar: 04/05- Opmerkingen: a/ b/ d/ i/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW 3er (E92, E93) 09/06- Type: 392C Coupé, Cabrio Bouwjaar: 09/06- Opmerkingen: a/ b/ d/ i/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW 6er (E63, E64) 01/04- Type: 663C, M6 Cabrio, Coupe Bouwjaar: 01/04- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW M3 (E46) 04/01- Type: M346 Convertible Bouwjaar: 04/01- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW M3 (E46) 06/00- Type: M346 Coupe Bouwjaar: 06/00- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW Z 3 10/95- Type: R Roadster Bouwjaar: 10/95- Opmerkingen: a/ b/ d/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren BMW Z 4 02/03- Type: Z 85 Roadster Bouwjaar: 02/03- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Chevrolet Corvette 01/97- Type: C5 Coupe, Convertible Bouwjaar: 01/97- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Chevrolet Corvette 06/06- Type: Z06 Coupé Bouwjaar: 06/06- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Citroen C4 02/05- Type: 849 L Coupe Bouwjaar: 02/05- Opmerkingen: a/ d/ j/ o Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
↵ LSD vleugeldeuren Corvette C7 coupe/roadster 13- Opmerkingen: Demontage en/of aanpassingen aan de wielkuiplijsten zijn noodzakelijk. De originele kabelboom in het portier kan, door de loopbaan te wijzigen, opnieuw worden gebruikt. Montagetijd 2 tot 2.5 dagen De gasdrukdempers zijn op basis van het gewicht va n de originele portieren geselecteerd. Bij afwijkende portiergewichten diene n de sterkere of zwakkere gasdrukdempers extra te worden besteld. De meerprijs bedraagt € 72,60 Gasdrukdempers kunnen door temperatuurschommelingen in kracht afnemen of toenemen. Deze afwijkingen vallen niet onder garant ie, tenzij kan worden aangetoond dat het om een materiaal of productiefout gaat.
LSD vleugeldeuren Crysler 300/300C 09/04- Type: LX Bouwjaar: 09/04- Opmerkingen: a/ d/ j/ z Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Crysler Neon 08/99- Type: PL Bouwjaar: 08/99- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Crysler PT Cruiser Type: Convertible Bouwjaar: Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Crysler PT Cruiser 06/00- Type: PT Bouwjaar: 06/00- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Daihatsu Copen 03/99- Type: L881 Cabrio Bouwjaar: 03/99- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ferrari F430 03/05- Type: F131 Coupé, Spider Bouwjaar: 03/05- Opmerkingen: a/ b/ c/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Fiat Coupe 11/93- Type: FA, 175 3-door Bouwjaar: 11/93- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Fiat Grande Punto 10/05- Type: 199 3-door Bouwjaar: 10/05- Opmerkingen: a/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Fiat Punto 09/93- Type: 176, GT-turbo 3-door Bouwjaar: 09/93- Opmerkingen: a/ b/ d/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Fiat Punto 09/99- Type: 188 3-door Bouwjaar: 09/99- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Fiesta 11/01- Type: JD3 3-door Bouwjaar: 11/01- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Focus 10/98- Type: DAW,DBW,DFW,DBX, 3-door Bouwjaar: 10/98- Opmerkingen: a/ b/ d/ g/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.